May we have your help please?
Our small channel is trying very hard to produce beneficial tutorials for our subscribers and viewers. It takes a long time to make, edit, upload, etc these videos. If you find these tutorials beneficial, the best way you can help is by watching as much of the tutorial as possible, liking, subscribing, and commenting. It would mean so much to us to be able to continue with this channel. We truly thank you ahead of time for your help.

If you haven’t seen it already, here is the link for the previous tutorial:

In this tutorial, you will finish making a parametric box for additive 3D printing or subtractive manufacturing. You will make the lid and add hex drive, flat-head screws to the assembly. This tutorial has a bunch of tips and tricks along the way that can help you apply the fundamentals of CAD and design to create something practical. Join along with this second part of this tutorial, and please consider liking and subscribing if you benefit at all from these tutorials.

Your will learn the following techniques in lesson 11 Part 2:

– Create the lid
– Add hex drive, flat-head screws to the assembly

Please don’t forget to like, comment, share, and subscribe!

Save $50 on a Fusion 360 subscription by using this referral code:
http://aklam.io/pPRhLK

Help support the Learn It! Channel:
– Buy Me a Coffee: https://www.buymeacoffee.com/adminsmh
– Become a Patron: https://patreon.com/user?u=100205872

Here’s some of the gear I use and can recommend: (Please note these are amazon affiliate links and I may receive a small commission, which is not added to the cost of any item, when you purchase products through my links)
– 3D Connection SpaceMouse Pro: https://amzn.to/3QBV3i2
– 3D Connection SpaceMouse Compact: https://amzn.to/47wR7ow
– Apple 2023 MacBook Pro Laptop M2 Pro: https://amzn.to/3RviiKO
– Audio-Technica AT2020USB+ Cardioid Condenser USB Microphone: https://amzn.to/463rTNm
– PHILIPS 27″ 4K Monitor: https://amzn.to/3PRX9cQ
– Sony WH-1000XM4 Wireless Premium Noise Canceling Overhead Headphones with Mic: https://amzn.to/3sJyZYR
– Logitech mouse and keyboard combo: https://amzn.to/4436VMR

00:00 – Start
00:50 – Hide unnecessary components
01:33 – Create the lid already!
03:13 – Insert them countersinks
05:34 – Add that lip
06:12 – Offset your sketch feature
07:21 – Lid to box joint
08:06 – Check them parameters
09:00 – Insert the screws
10:58 – Joint them screws
12:09 – Adjust appearances
13:34 – Create the fillets
14:48 – Add appearances
15:16 – 3D Connexion SpaceMouse

#learnit #fusion360 #tutorial #drawings #manufacturing #thread #threads #screws

source

Previous articleINSTA360 ONE RS 4K Edition 1 x Optical Zoom Waterproof 4K 60fps Action Camera #viral #views #shorts
Next articleInsta360 Go 3 vs X3: What’s the difference?