In this tutorial you will learn how to insert a part into a parametric vines, discusses many benefits of why to use a fixture with your setup, and check for any collisions. We are happy you’ve joined us on the Learn It Channel. Welcome to Metal CAM #2 – Use a Parametric Vise with your part.

Your will learn the following techniques in this tutorial

– Insert a visa into your design workspace.
– Break links so that you can use the parameters
– Joint your part and vice together
– Add a fixture to your setup information
– Check for collisions and adjust your setup easily if needed

May we have your help please?
Our small channel is trying very hard to produce beneficial tutorials for our subscribers and viewers. It takes a long time to make, edit, upload, etc these videos. If you find these tutorials beneficial, the best way you can help is by watching as much of the tutorial as possible, liking, subscribing, and commenting. It would mean so much to us to be able to continue with this channel. We truly thank you ahead of time for your help.

Help support the Learn It! Channel:
– Buy Me a Coffee: https://www.buymeacoffee.com/adminsmh
– Become a Patron: https://patreon.com/user?u=100205872

Save $50 on a Fusion 360 subscription by using this referral code:
http://aklam.io/pPRhLK

Here’s some of the gear I use and can recommend: (Please note these are amazon affiliate links and I may receive a small commission, which is not added to the cost of any item, when you purchase products through my links)
– 3D Connection SpaceMouse Pro: https://amzn.to/3QBV3i2
– 3D Connection SpaceMouse Compact: https://amzn.to/47wR7ow
– Apple 2023 MacBook Pro Laptop M2 Pro: https://amzn.to/3RviiKO
– Audio-Technica AT2020USB+ Cardioid Condenser USB Microphone: https://amzn.to/463rTNm
– PHILIPS 27″ 4K Monitor: https://amzn.to/3PRX9cQ
– Sony WH-1000XM4 Wireless Premium Noise Canceling Overhead Headphones with Mic: https://amzn.to/3sJyZYR
– Logitech mouse and keyboard combo: https://amzn.to/4436VMR

00:00 – Start
00:41 – Intro
01:40 – Enter the Design Workspace
03:20 – Mate our stock to our part
07:08 – Create our second setup
11:57 – Remember them datums!
12:31 – Enter Manufacture Workspace
15:29 – Fix any collisions

#learnit #fusion360 #tutorial #drawings #manufacturing #vise #parametric

source

Previous articleinsta360 GO3 – MUST HAVE Accessories
Next articleUltimate Insta360 Video Course LAUNCH | Half Price Discount!